Swivel Toggles for Ball Bearing Swivels Model TW and THD from Lewis Manufacturing Company ©

Grip & Swivel
Models Menu

Dual Lift-Eye / Cord Cap
Dual Lift-Eye - TB
Duct Puller
Fiber Optic CM, SL, SLR
Fiber Optic X - XIE
Fiber Optics Split SL/SR
Fiber Optics Special
Flex-Eye & JL-R
Heavy-Duty Split
Hook Bail
Hook Bail - TB
Inline Horizontal
Kit & Grip Cases
Loop Bail
Loop Bail - TB
Maxi-Grips
Misc. Hardware
Offset Eye
Offset Eye - TB
Ouchless Lewis Grips™
Pulling Collars
Pulling Grips AAA to B
Pulling Grips C to F
Pulling Grips G to K
Pulling Grips OH, R, WRC
Ring & Conduit Riser
Riser Hook Bail
Rod / Lace Closing
Snake Grips
Special Heads
Split Ring
Strain Relief
Swivel Eye Grips
Wedge Grip
Swivel - Grease Zerk
Swivel - Heavy Duty
Swivel - Links
Swivel - Regular Duty
Swivel - Sealed
Swivel - Sealed Flange
Swivel - Sealed Thrust
Swivel - Toggles
U Bail
U-Bail - TB
X-Series

Swivel Toggles For
Ball Bearing Swivels

Swivel Toggles for Ball Bearing Swivels Lewis Swivel Toggles are used in conjunction with our ball bearing swivel. The toggles provides a 90 degree "breakover" when pulling through angle structures or sharp bends in conduit.

It is important that you read and understand all breaking strength, safety and technical data relating to all Lewis Manufacturing Company products before use. Make a complete inspection of swivels before each use. Do not alter or modify units. Make sure that the end pens make up properly and Allen screw is in place. Rotate swivel by hand to determine proper operation of bearings. Please order carefully. Lubricate all grease able swivels before and after each use. Do not exceed published working load on any Lewis ball bearing swivel.

(TW) Regular Duty Swivel Toggle
Part #	Length (A)	Pin Diameter (B)	Jaw (C)	Diameter (D)	Working Load	Approx. Break Stgth.
TW-1	2 3/4"	7/16"	5/8"	1 11/32"	5,000 lbs.	15,000 lbs.
TW-2	3 5/8"	1/2"	7/8"	1 5/8"	5,400 lbs.	16,200 lbs.
TW-3	4 1/4"	5/8"	1"	2"	12,000 lbs.	36,000 lbs.
TW-4	5"	3/4"	1 1/4"	2 1/4"	15,000 lbs.	45,000 lbs.

(THD) Heavy-Duty Swivel Toggle
Part #	Length (A)	Diameter (D)	Jaw (C)	Working Load	Approx. Break Stgth.
THD-0	3"	1 1/8"	1/2"	5,400 lbs.	16,200 lbs.
THD-1	3 1/2"	1 3/8"	1/2"	9,000 lbs.	27,000 lbs.
THD-2	4 1/2"	1 5/8"	5/8"	12,000 lbs.	36,000 lbs.
THD-3	5 1/8"	2"	3/4"	21,000 lbs.	63,000 lbs.
THD-4	6 1/8"	2 3/8"	7/8"	30,000 lbs.	90,000 lbs.

It is important that you read and understand all breaking strength, safety and technical data relating to all Lewis Manufacturing Company products before use.

Distributors & Reps
for Full Access



\| HOME \| Utility \| Oilfield \| Canvas \| Friction \| Industrial \| Waterjet \| Targets \| Download \| Contact \|

		© 1998-2010 Lewis Manufacturing Company ~ All Rights Reserved \| Talk to Andy \| Terms of Use \| Rowdy the Snake Wrangler™ \| About \|
		a BizProNet™ design

Swivel Toggles ForBall Bearing Swivels

Swivel Toggles For
Ball Bearing Swivels